Hello. For the past few years, I've been waiting on IPv6 to come to my Time Warner connection. I recently thought that maybe it was my Ubee ddw365 because it had no mention of IPv6 in the web interface.
I finally went and swapped at my local office in Newark Ohio and they gave me an Arris DG860 to try. They were not able to tell me if IPv6 was available in the area yet or not. They weren't sure what it was, actually.
Is there a way to get an official answer as to if IPv6 is available in my area or not? I do know that the town that I moved from (Zanesville Ohio) has it now that I've moved from there If not, is there even a rough idea of when? It's better than the reaction of "What is IPv6?". Does the modem have to be in bridged mode? Before I changed it to bridged mode, the web interface had blank values for it's IPv6 address.
Solved! Go to Solution.
IPv6 is supposed to be almost universal in the legacy TWC footprint. The standard test is to connect a computer directly to the modem and try to get an address via DHCPv6. Modern versions of Windows will try to do this automatically. On other systems you might have to enable IPv6.
If you don't get an address you should sniff the interface for IPv6 traffic. If you do get an address your gateway device is probably misconfigured.
they gave me an Arris DG860
I'm sorry, I tend not to pay attention to the models posted because I assume if you want IPv6 you'll make sure you have a modem/router that supports IPv6. See lease-or-buy-modem.html or download twc-compatible-modems.pdf.
If they don't offer one on the list (e.g. DG860) you'll have to check for IPv6 capability yourself. If the local office can't help you send a private message to support address here on the forum.
That TWC office might be one of the bought out systems, Like WOW,
The only IPv6 functioning modem only/ no router they should have are SB6141 modems, I wouldn't settle for a SB6120/21 or ubee
supposedly a SBG 6580 Version 2 is IPv6 capable in a modem router combo and of course, dg 1670 and TV 8715's are as well.
being on top of the Columbus RDC, you might have better luck with ipv4/ipv6 speed issues than we do up here in Cleveland.
The 2 paths are routed differently with lots of latency/ jitter on IPv6 resulting in timeouts and internal sync stability issues in devices when both are in use, the only solution is to turn off IPv6
If you buy a modem, get a 6183/6190 as the 6141's are going to be an issue when they bump your system to over 16 channels and the 6141's can't handle that bandsplit. The 6121's can only handle 6 channels and shouldn't be relied on anywhere for speeds over the 3 meg economy tier, lol.
Thanks for the reply!
Yeah, they didn't know anything about it. I traded the modem on a whim to hope the other one would have something more with IPv6. That said, the new one (DG860) has IPv6 sections in the WAN and LAN interfaces. It was set to pull an IPv6 address from the looks of it but there was nothing. I saw in other areas on the web that it did support IPv6, so that was more of a plus for me than the Ubee was.
Yeah, I need to just buy one anyhow. I may just go to the big box store tomorrow and grab the Arris 6183 for $89. I guess I've just been waiting to find the right modem. That said, the cable company here used to apparently be Adelphia cable and they seem to always be behind of the features that my old city used to have just 25 minutes east of here.
Also, i'm in the networking field and want to learn and experiment with IPv6. It doesn't help that I was in a class all week where we kept talking about it peaking my interest yet again. I'll have to try the Arris 6183 soon. It'll eventually pay for itself with modem rentals being 10/month.
Thanks for the responses.
After switching it over to bridged mode, I am unable to login to the web interface. I'm going to reset it and make sure I didn't fat-finger anything. Can't swing the new modem right now but I'll get the Arris 6183 at least when I do. We only have speeds up to 50Mbps right now and I don't see it going much higher anytime soon. DSL goes up to 100Mbps here but the cutoff is a road over from my house. Haaa.
Sorry to keep bringing this thread back up but I just saw one of the sticky threads. http://forums.timewarnercable.com/t5/IPv6/Approved-Modem-List/td-p/103915
Is that an old message about the 6183 not supporting IPv6 "currently" which was a while ago. Just checking lol
Also, the version on the bottom of my 860 says DG860A if that helps.
if you bypass the router, the gui changes to 192.168.0.1
With a router it's 192.168.100.1
6183's now have a working IPv6 firmware, 6141's work well but if twc goes more than 16 channels , it exceeds the 6141's acceptance bandwidth of which TWC has no clue what issues that creates, it's their CMTS that has isssues setting modem channels and not the customers modem, unless it's an old 4x4 like a 6121 that will only span 6 channels or so.