Browser

Re: Daily Internet Drops

Does the resistance matter for the terminating resistor?
Expert

Re: Daily Internet Drops

The screw on F terminators are 75 ohms, It needs to be inside the F connector to prevent ingress and egress.

 

Only when you go to BNC's do you see different resistances. 50, 75, 93 are common

Browser

Re: Daily Internet Drops

Hey all. Just installed the splitter and terminator. Here are what the levels look like:

Downstream Bonding Channel Value

Channel ID10 11 12 13 14 15 16 
Frequency513000000 Hz 507000000 Hz 519000000 Hz 525000000 Hz 531000000 Hz 537000000 Hz 543000000 Hz 549000000 Hz 
Signal to Noise Ratio39 dB 38 dB 39 dB 39 dB 38 dB 39 dB 39 dB 39 dB 
Downstream ModulationQAM256 QAM256 QAM256 QAM256 QAM256 QAM256 QAM256 QAM256 
Power Level
 
8 dBmV  8 dBmV  8 dBmV  8 dBmV  8 dBmV  8 dBmV  7 dBmV  8 dBmV  

Upstream Bonding Channel Value

Channel ID
Frequency30600000 Hz 37000000 Hz 19400000 Hz 24200000 Hz 
Ranging Service ID2955 2955 2955 2955 
Symbol Rate5.120 Msym/sec 2.560 Msym/sec 2.560 Msym/sec 5.120 Msym/sec 
Power Level42 dBmV 43 dBmV 42 dBmV 42 dBmV 
Upstream Modulation[3] QPSK
[1] 16QAM
[2] 64QAM
 
[3] QPSK
[1] 16QAM
[2] 64QAM
 
[3] QPSK
[2] 16QAM
 
[3] QPSK
[1] 16QAM
[2] 64QAM
 
Ranging StatusSuccess Success Success Success 
Channel ID10 11 12 13 14 15 16 
Total Unerrored Codewords23282792 23300942 23274730 23291982 23265058 23264623 23266416 23268059 
Total Correctable Codewords15 13 10 43 13 53 
Total Uncorrectable Codewords611 545 486 501 704 648 655 576