a month ago
My WMC is no longer downloading guide/channel listings after the switch from TWC to Spectrum. The cable card and all equipment is working properly - I have no signal loss or any other issues except for WMC downloading the guides.
Is there a ticket/resolution underway for fixing this problem? If so could someone please create one.
Solved! Go to Solution.
a month ago
Couple of issues, mainly Microsofts cancellation of WMC support.
What OS are you running?
What capture device?
none of the above are supported... most likely
Where is your guide coming from?
It may be dead as well...
Can you use the guide at watch spectrum.net?
a month ago - last edited a month ago
The guide was working fine until the exchange between TWC and Spectrum. This is not a MS issue - I can change the provider (non TWC/Spectrum) and it tries to pull in that data and program the channels for the cable card but all the data is wrong. Channel lineups - guides for non box set users are provided by the service provider; not MS
If cable card services are not provided by spectrum then I have a serious problem because the tuner services work just fine; I am paying for it through my package; and the card and the tuning adapter are TWC/Spectrum provided equipment. I also fail to see what net services has anything to do with tuner fed signals. Spectrum comes up as the service provider/channel lineup when I use the WMC setup up and it gives me that much. Upon trying to update the guide (which went without a hitch through TWC) it suggests that the guide was updated / but it was not
4 weeks ago
You still haven't answered the question.. What OS and card are you using? What is the cable card plugged into?
WMC does not use the TWC/ Spectrum guide , at least mine didn't, and I got fed up with trying to update both so they agreed. Finally killed WMC off as it lost support.
When did this actually happen?
Did something just get updated?
The TWC to Spectrum switch was last year... or did you just recently switch providers from legacy TWC to Spectrum?
4 weeks ago - last edited 4 weeks ago
This issue has been resolved. There was something wrong with one of the EPG files which was causing it to be locked and not update with data. Removing the guide files and reapplying the configurations through WMC corrected the problem and guides are back.
OS is windows 8.1 / Card is in a HDHR prime
Not sure about your experiences with WMC in general - but I personally have not had any problems with the guides up until this point. Because of the timing and the change of the guide label online (TWC Dayton) to (Spectrum Dayton) - I was under the assumption that it was something that had changed on either Spectrum side or the third party that handles the guide listings. in either case I figured I would start at the closest relative possibility.
With live TV online most people dont require an older setup; or they can use a Roku if they want to have a more box-like expererience. But there is just no other way or software to do DVR on shows that do not have an on demand option online - and do not want the extra equipment in their home. WMC is the only platform that can do this thanks to the overzealous DRM placed on almost all content. And one cannot DVR a show - without a accurate guide to set up a scheduled record.
2 weeks ago
I am having a similar problem. CableCard in personal compter with WMC and Ceton tuners working fine for about three years in Lexiington, KY. Yesterday I noticed that the program guide had not downloaded and would not download. The system has been getting the guide from Spectrum, not a third party. No recent change TWC vs Spectrum as far as I know. What files did you remove before trying to reload?
2 weeks ago