Observer

My Modem signal levels (ubee)


Any issues you see with signals from my modem?
I have no problems watching cable tv on any of my 2 tv. Internet works ok, wifi signal drops a few times per day but no major problems.
StatusBasicAdvancedFirewallParental ControlWirelessMoCA
Logout
Status
Software
Connection
Account
Diagnostics
Client List
User Default
Connection > Status > Connection

Startup Procedure
Procedure Status Comment
Acquire Downstream Channel 573000000 Hz Locked
Connectivity State OK Operational
Boot State
Configuration File OK
Security Enabled BPI+


Downstream Bonded Channels
Channel Lock Status Modulation Channel ID Frequency Power SNR Correctables Uncorrectables
1 QAM256 573000000 Hz 20.2 dBmV 38.3 dB 6 0
2 QAM256 579000000 Hz 20.5 dBmV 38.3 dB 2 0
3 QAM256 615000000 Hz 19.1 dBmV 37.4 dB 0 0
4 QAM256 627000000 Hz 18.9 dBmV 37.4 dB 0 0
5 QAM256 633000000 Hz 18.8 dBmV 37.4 dB 1 0
6 QAM256 639000000 Hz 19.1 dBmV 37.5 dB 0 0
7 QAM256 645000000 Hz 19.3 dBmV 37.8 dB 1 0
8 QAM256 651000000 Hz 19.2 dBmV 37.7 dB 0 0
9 QAM256 657000000 Hz 19.1 dBmV 37.6 dB 0 0
10 QAM256 663000000 Hz 19.4 dBmV 37.8 dB 0 0
11 QAM256 669000000 Hz 19.2 dBmV 37.7 dB 1 0
12 QAM256 675000000 Hz 19.4 dBmV 37.3 dB 0 0
13 QAM256 681000000 Hz 19.6 dBmV 38.1 dB 0 0
14 QAM256 687000000 Hz 19.3 dBmV 38.0 dB 0 0
15 QAM256 693000000 Hz 19.7 dBmV 38.3 dB 1 0
16 QAM256 699000000 Hz 19.5 dBmV 38.2 dB 0 0

Total Correctables Total Uncorrectables
12 0


Upstream Bonded Channels
Channel Lock Status US Channel Type Channel ID Symbol Rate Frequency Power
1 ATDMA 2560 Ksym/sec 37000000 Hz 51.0 dBmV
2 TDMA 2560 Ksym/sec 18500000 Hz 48.3 dBmV
3 ATDMA 5120 Ksym/sec 23300000 Hz 49.3 dBmV
4 ATDMA 5120 Ksym/sec 30600000 Hz 51.0 dBmV

CM IP Address Duration Expires
D: -- H: -- M: -- S: -- --- --- -- --:--:-- ----


Current System Time: Sun Feb 12 21:30:18 2017
© 2016 Ubee Interactive. All rights reserved.
3 REPLIES
Expert

Re: My Modem signal levels (ubee)

Levels are imballanced... Looks like there's the wrong type of amplifier inline.

 Are you internet only?

 

Observer

Re: My Modem signal levels (ubee)

Cable tv and internet
Established Sharer

Re: My Modem signal levels (ubee)

This might work even better without the amplifier, using just a 3-way splitter.  Put the modem on the -3.5 port and the two TV set-top boxes on the two -7 dB ports.